|
|
|
|
|
Home  Tools & Equipment Pearl Equipment |
 |
This simple jig holds pearls or beads securely so you can drill them.
There is a 1.20 mm guide hole in the bottom of the frame for a pearl or twist drill.
aka a pearl vice
| |
Code |
Price ex. GST |
|
| |
VI1253 |
$18.00 |
 | |
|
 |
Pearl Drilling Vice Jig.
Pearl Jig for drilling pearls.
Capacity: Up to 10mm
| |
Code |
Price ex. GST |
|
| |
VI1202 |
$15.00 |
| |
|
 |
This handy French-made pearl drilling vise holds various sized pearls
or beads securely so that they made be drilled. |
 |
This is the genuine Japanese pearl drilling lathe, the first and best pearl drilling machine on the market, far superior to the less expensive Chinese copies on the market. The difference is the quality of the components and the care of assembly, resulting in a pearl drilling machine that will drill perfectly aligned holes every time, time and time again, for many years to come.
Our Japanese pearl drilling lathe produces a perfectly drilled hole with no deformation caused by the drill exiting the hole. That is because the lathe has a holding jig that allows for turning the pearl 180° while maintaining perfect alignment. Simply mount the pearl using the appropriate set of pearl or bead holders from the accessories kit, then begin drilling the pearl by bringing the holding jig up against the stationary drilling motor with the appropriate sized pearl drill attached. When you are approximately half way through the pearl, pull back the lever on the holding jig all the way to the point where the holding jig unlocks from it's current position, and rotate the holding jig 180° to begin drilling into the pearl exactly where the halfway drilled hole is. The holding jig locks into position exactly at the correct spot. The result is a perfectly drilled hole with no "exit wound" damage caused by the drill bit.
This unit is meant for production work, and has two catch trays on either side of the holding jig for keeping the drilled pearls together as you work from pearl to pearl. Includes:
* Five pairs of pearl holding cups,
* Two genuine Japanese pearl drills
* Two wrenches
* One chuck key for the adjustable Jacobs chuck that holds the drills
The Japanese Pearl Drilling Lathe measures 9-1/2" long by 4-1/2" (8-1/2" with handle attached) wide by 4-1/2" high. |
 |
The pearl drilling lathe produces a perfectly drilled hole with no deformation caused by the drill exiting the hole. That is because the lathe has a holding jig that allows for turning the pearl 180° while maintaining perfect alignment.
Simply mount the pearl using the appropriate set of pearl or bead holders from the accessories kit, then begin drilling the pearl by bringing the holding jig up against the stationary drilling motor with the appropriate sized pearl drill attached.
When you are approximately half way thru the pearl, pull back the lever on the holding jig all the way to the point where the holding jig unlocks from it's current position, and rotate the holding jig 180° to begin drilling into the pearl exactly where the halfway drilled hole is.
The holding jig locks into position exactly at the correct spot. The result is a perfectly drilled hole with no "exit wound" damage caused by the drill bit.
This unit is meant for production work, and has two catch trays on either side of the holding jig for keeping the drilled pearls together as you work from pearl to pearl.
Includes:
Five pairs of pearl holding cups,
Two genuine Japanese pearl drills
Two wrenches
One chuck key for the adjustable Jacobs chuck that holds the drills |
 |
Made in Japan with quality Tool Steel. Double ended for longer lasting.
These hard to find spade type pearl drills are double ended and, unlike twist drills, can be easily resharpened. They are best used in the Japanese pearl drilling machine or in some sort of pearl cutting jig.
Shank diameter is the same as the drill. Made in Japan of high-speed steel. Sold by the piece.
| |
Code | | Diameter |
Price ex. GST |
|
| |
PD008 | | 0.8mm |
$4.50 |
| |
| |
PD009 | | 0.9mm |
$3.50 |
| |
| |
PD011 | | 1.1mm |
$3.50 |
| |
| |
PD012 | | 1.2mm |
$3.80 |
| |
|
Pearl Drilling Blades. Single ended type
| |
Code | | Size |
Price ex. GST |
|
| |
PD0850810 | | 1.0mm |
$2.40 |
| |
| |
PD0850811 | | 1.1mm |
$2.40 |
| |
| |
PD085088 | | 0.8mm |
$2.40 |
| |
| |
PD085089 | | 0.9mm |
$2.40 |
| |
|
 |
Jewellers vice for holding pearls and beads for use when drilling holes to make jewellery. |
 |
6-1/2" Sturdy construction. Non-marring hard plastic cup tips.
Useful for pearl & bead reaming, drilling, sorting and stringing.
| |
Code |
Price ex. GST |
|
| |
TW104 |
$12.50 |
| |
|
|
|
|
| © 2025 RegalCastings Ltd. | Sitemap | Links | Terms and Conditions | Contact Us |
