|
Carving, Shaping and Forming Tools |
 |
Each 145mm long tool is a different shape and is equipped with a comfortable vinyl grip. Easily sharpened or re-shaped. All housed safely in wooden case.
| |
CODE |
Price ex. GST |
|
| |
WA1721 |
$85.00 |
 | |
|
 |
This 3pc Precision Carver Set has pointed tips for fine work. Features single cuts which will not clog yet leaves a smooth surface. Made of stainless steel with sure-grip handles they are the only files of this type available today. 5-1/2" length.
| |
Code |
Price ex. GST |
|
| |
WA74000 |
$25.50 |
| |
|
 |
Aluminum, with one 90° and two 45° cutting slots. For use with a razor saw blade. |
 |
Phenomenal tools for filing and shaping wax, but also exceptional bead or pearl reaming tools.
Our detailers are extremely small to work in tight places and enlarge small holes where necessary.
The points have file-like edges to cut smoothly and quickly.
Stainless steel tips will not rust.
This set features fine and very fine reamers (0.6mm and 1.0mm diameters) with comfortable wood handles.
Each is packaged in a clear protective tube. Total length 5", handle length 4" and handle diameter 3/8" |
 |
Wooden handled spatula used for shaping and forming wax.
| |
Code |
Price ex. GST |
|
| |
WA0166 |
$12.00 |
| |
|
 |
Wooden Handled Wax Carvers.
Excellent tool to file in tiny corners where other tools can not reach, spiral edges are specially designed for filing waxes
| |
Code | | Shape |
Price ex. GST |
|
| |
WA1250 | | Fine |
$9.95 |
| |
| |
WA1250A | | Extra Fine |
$9.99 |
| |
|
 |
Zona Mitre Set. Aluminum Miter Box and Fine Kerf Saw
6.5". aluminum miter box has thin slots for 60, 45, 90 degree angle accurate cuts with fine kerf saw.
Saw Specs: 6.5" (165mm) long x 1.18" (30mm) deep
Saw is 42 Teeth Per Inch. (16.5 teeth per cm, 0.6mm tooth pitch)
| |
Code |
Price ex. GST |
|
| |
WA67000 |
$55.00 |
| |
|
 |
| |
Code |
Price ex. GST |
|
| |
WA665 |
$45.00 |
| |
|
 |
| |
Code |
Price ex. GST |
|
| |
WA664 |
$25.00 |
| |
|
 |
Used with meths, this will heat up your carving tools to cut/scrape waxes to leave a smooth finish
| |
Code | | Description |
Price ex. GST |
|
| |
SO0287 | | Lamp |
$14.90 |
| |
| |
SO0293 | | Replacement Wick |
$2.50 |
| |
| |
SO0294 | | Wick for Alcohol Lamp 6.4mm |
$2.50 |
| |
|
 |
Set of 4 stainless steel carving tools
Supplied in a storage pouch
| |
Code |
Price ex. GST |
|
| |
WA1136 |
$25.00 |
| |
|
 |
3 Probes
Supplied in a storage sleeve
| |
Code |
Price ex. GST |
|
| |
WA798 |
$14.00 |
| |
|
 |
This all inclusive 13 piece kit comes in a smart wooden box to keep tools at hand. Items included are: Set of six sharp-edge wax carvers, One Max Wax hotpoint pen, Two wax detailers, Three EURO Precision Wax Files, One 10X Loupe, Max Wax includes battery.
| |
Code |
Price ex. GST |
|
| |
WA10500 |
$149.50 |
| |
|
 |
Wax ring mandrel enlarges the size of wax rings and wax tubes.
Evenly spaced blades for even cutting and pressure around wax.
Knurled handle provides excellent grip and control.
| |
Code |
Price ex. GST |
|
|
|
WA1710 |
$65.00 |
| |
|
 |
Enlarge the finger size of your wax models quickly and accurately. Hardwood mandrel is specially machined to incorporate a cutting steel blade that extends from the handle to the tip on the tapered section.
Slide this tool through the hole of wax ring or ring tube and gently rotate clockwise. As the blade turns it scrapes inner wall, enlarging the ring to the size that is marked along the mandrel, leaving a smooth and even finish on the ring.
| |
Code |
Price ex. GST |
|
| |
WATEMP18 |
$79.95 |
| |
|
 |
Fine detailers with stainless steel tips and wooden handles for filing and shaping wax. The points have very sharp file-like edges to cut smoothly and quickly. 5" overall length with wooden handle. Made in USA.
| |
Code | | Description |
Price ex. GST |
|
| |
WA50510 | | FINE 1.0mm |
$10.00 |
| |
| |
WA50505 | | Very Fine 0.6 mm Tip |
$10.00 |
| |
|
|
WA50515 | | Both Fine and Very Fine |
$17.00 |
| |
|
 |
Hardwood Mandrel has a steel cutting blade from the handle to the end. Labelled in European sizing
| |
Code |
Price ex. GST |
|
| |
WATEMP90 |
$22.00 |
| |
|
 |
Slice bars, rods and wax ring tubes into tablets with perfectly straight and parallel walls or tapered sides. The ring tube is held firmly in position inside the box so there is no strain on your hand.
With stop/lock feature for cutting several tablets of the same thickness. The fine steel saw blade allows you to cut through the tube with no effort, leaving a smooth finish that does not require any filing.
Set includes extruded aluminium 6" x 2" (152 x 51 mm) mitre box, steel hand saw and stop/lock.
| |
Code | | Description |
Price ex. GST |
|
| |
WATEMP17 | | Replacement saw |
$70.00 |
| |
|
 |
A good design begins with a perfect blank.
With the Matt Reamer you can quickly create perfect wax blanks, with smooth and parallel walls and bore finger sizes straight through the blanks, to the exact dimensions. The Reamer consists of a precision ground steel rod with a holding knob and two specially designed carbide blades. |
 |
Designed for wax cutting.
Every other tooth is eliminated to provide smooth cutting and non-loading
action.
One dozen size #1 blades to a package. Sold by dozen.
| |
Code |
Price ex. GST |
|
| |
SB0320DOZ |
$6.00 |
| |
|
 |
Double-end vulcanite file with open, coarse teeth for filling plastics, waxes and soft materials. One end is coarser than the other.Double cut on both sides.
| |
Code | | Size |
Price ex. GST |
|
| |
FI15408 | | 200mm (8") |
$40.00 |
| |
|
 |
Features full instruction on jewelry illustration, with step-by-step guidelines and clear photographs.
Hard cover with 152 pages and hundreds of full color photographs and illustrations.
Also include in the kit are five 8-1/4" x 5" design templates.
| |
Code | | Description |
Price ex. GST |
|
| |
BO0430 | | Book only |
$195.00 |
| |
| |
BO0440 | | Set of five different templates only |
$165.00 |
| |
|
 |
Single template of stone shapes, as found in the 5 piece pack of BO0440 |
 |
Eliminates drawing ring outlines with rulers and dividers. Avoids the irregular contour of a shank made free-hand. Has 18 different cut-out ring shapes. Made of durable plastic with precision milled shapes. Includes instructions and two samples of carving wax tablets.
| |
Code |
Price ex. GST |
|
| |
WATEMP13 |
$42.00 |
| |
|
 |
Set of seven heavy gauge plastic templates for custom jewelry design. Includes templates for round, oval, baguette, emerald, marquise and pear stone shapes, as well as templates for ring and setting designs.
Contains metric and carat equivalents for accuracy and convenience. |
 |
Includes "How To Create Settings In Metal Wire And Wax" by world famous designer Adolfo Mattiello, along with two templates.
Shows step-by-step how to make many different settings with drawn metal wire. It also shows how to join settings.
The wax working section shows how to make settings with carving wax, prong settings and settings turned on your Matt Mini-Lathe.
| |
Code | | Description |
Price ex. GST |
|
| |
WATEMP14 | | Template for round settings |
$32.00 |
| |
| |
WATEMP15 | | Template for oval, pear and marquise settings |
$39.50 |
| |
|
 |
Provides you with a versatile extrusion technique for creating jewelry models.
The gun enables you to control the temperature and pressure of the extrusion process, thus creating wire shapes of various characteristics.
Three methods of design are possible: on objects, free-form and on water for abstract effects.
| |
Code |
Price ex. GST |
|
| |
WA00955/220 |
$499.00 |
| |
|
 |
Pkt Of 10
| |
Code | | Description |
Price ex. GST |
|
| |
WA00951/6 | | Blue-for mandrel work |
$9.50 |
| |
| |
WA00951/7 | | Green for use on water |
$7.50 |
| |
| |
WA00951/8 | | Red for wire & weaving |
$8.00 |
| |
|
 |
A versatile hand-held lathe, powered by a flexible shaft motor, designed to turn rods of carving wax. Includes precision gauge for measuring exact dimensions and thickness of work.
Easily produce bands, bezels, settings, coin holders, chess pieces, etc. Set includes a cutting tool, 2 extra cutting tool blanks, 3 collets to hold wax, sample wax instruction book, and a 3-pc. stainless steel double-ended blade set.
The six different ends give you a cut-off tool, a channel cutter, a half-round band hollower, a frame shaper, and a cup former. Blades are .025" thick, 1/4" wide, and 4" long, and can be bevelled to increase the number of designs possible. |
| |
Code | | Part Description |
Price ex. GST |
|
| |
WA02835 | | Milling table |
$32.00 |
| |
| |
WA02840 | | Tool holder and wrench |
$35.00 |
| |
| |
WA02845 | | Cutting tool square end |
$12.50 |
| |
| |
WA02885 | | Rotary file |
$80.00 |
| |
| |
WA02801 | | Blades for Matt Lathe |
$55.00 |
| |
|
 |
Designed for precision filing of large pieces.Made of cast aluminium with a steel support bracket, powered by a flexible shaft. The table provides ideal support when cutting large pieces such as bracelets and adjusts to allow cutting at different angles.
The removable fence regulates the depth of cut ensuring precise and safe operation. Includes bracelet template, rotary file, 2 bracelet wax blanks and instructions
Handpiece and cable not included.
| |
Code | | Description |
Price ex. GST |
|
| |
WA002895 | | Shaper set |
$338.50 |
| |
| |
WA02885 | | Replacement rotary file only |
$80.00 |
| |
|
 |
Enables you to precisely file shapes and flat or curved surfaces, at different angles.
Powered by a flexible shaft and designed to simplify this procedure while improving uniformity.
Ideal for creating channels.
Comes with rotary file, ring template, 3 different color waxes and instructions.
Handpiece and cable not included.
| |
Code |
Price ex. GST |
|
| |
WA002880 |
$375.00 |
| |
|
